[Badger] The Carpenter Set - Gunmetal Grey

Before choosing belt size PLEASE read the belt sizing guide below. Do NOT just go by your pants size as it can lead to an incorrectly fitted belt. 

For an optimal fit, there should be 2″ to a max of 6″ of open space between your belt ends. For instance, if your measurement is 36”, you should go with a MD belt which will leave about 3” of open space. Keep in mind, if you prefer your bags to sit further back, order on the small side.  

 [Your size - belt pad lentgh = between 2-6 inches]

The Carpenter Set is a great all-around tool belt suitable for many trades and has enough versatility to serve you well throughout most phases of construction from framing to finish work. This set up consists of the contoured belt with metal COBRA® buckle, C1 on the dominant side and the S1 on the non-dominant. 

C1 Bag Configuration: Tape pouch, 5 tool slots in main pouch-three along inside back and two inside front, single outside lower pouch with tool slot, rear tool loop. Pencil/utility combo up front with three small slots and one deep pocket. Overall length is approximately 14". 

S2 Bag Configuration: 3 elastic nail set slots in tape pouch, speed square slot, lower tool slot, side by side outside pouches, slots in each fastener pouch, reinforced bar slot on underside of the bag. Overall length is approximately 14".  

As with all Badger bags, the bottom of the main and fastener pouches are reinforced with USA made tactical webbing to increase puncture and abrasion resistance.